Actuators/Solenoids: Actuators, such as solenoids, convert electrical signals into mechanical motion and play a key role in many vehicle systems. Common examples include HVAC blend doors, turbocharger vanes, intake manifold runner valves, variable valve timing (VVT) solenoids, and transmission shift solenoids.

When actuators or solenoids fail, they can lead to a variety of problems such as unusual clicking or buzzing noises, rough idling, reduced engine power, poor fuel economy, incorrect HVAC airflow direction or temperature, hard or erratic shifting, loss of turbo boost, or the illumination of warning indicators like the check engine light or transmission fault light.

We verify power, ground, signal inputs and feedback voltages before replacing any component. Our diagnostics include scan tool actuation tests and direct circuit probing where needed.

To get an estimate or schedule your actuator service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Alarm System: We diagnose and repair issues in factory and aftermarket alarm systems, including false triggering, failure to arm or disarm, and electrical faults in sirens or sensors. If your alarm system is draining your battery or interfering with your ability to start the car, we can trace the issue to its source.

We also address improperly installed systems that may cause intermittent no-start conditions, central locking malfunctions, or electronic module faults. Our careful diagnostic process ensures proper integration with your vehicle’s electrical architecture.

To get an estimate or schedule your alarm system service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Audio System: We address common audio problems such as intermittent sound, distorted playback, or complete audio failure. This includes diagnostics on speakers, head units, factory amplifiers, and Bluetooth or media interfaces.

Whether your system is OEM or aftermarket, we verify audio power and ground paths, check for signal integrity, and test output components before making precise repairs or replacements that restore sound clarity and system functionality.

To get an estimate or schedule your audio system service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Cooling Fan Repairs: Engine cooling fans are critical for maintaining optimal operating temperature. We troubleshoot fan relays, control modules, resistors, and wiring problems that may cause fans to run continuously, fail to activate, or behave erratically.

We test circuits under load and examine ECU commands during operating conditions to verify correct temperature thresholds and sensor inputs. If the motor itself is burned out or jammed, we replace it with a properly rated component to ensure longevity.

To get an estimate or schedule your cooling fan service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Cruise Control System: Modern cruise systems rely on a complex interaction between steering column switches, brake and clutch inputs, speed sensors, and control modules. We locate faults in any of these areas that cause your cruise system to become inoperative or unstable.

We test switch resistances, monitor data in real-time, and verify actuator outputs. Whether it’s a failed clockspring or a miscalibrated sensor, our diagnostics ensure safe and consistent cruise operation.

To get an estimate or schedule your cruise control system service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




ECU (Electronic Control Units): When control units malfunction due to internal failures or software corruption, we diagnose these faults using bi-directional scan tools and voltage trace techniques. Symptoms may include poor shifting, no-start conditions, or unexplained electrical behavior.

We confirm unit integrity by testing inputs, verifying power and ground quality, and ruling out wiring defects before replacement. Once verified, we replace or reprogram modules as needed to restore vehicle functionality.

To get an estimate or schedule your ECU service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Electrical Diagnostics: From parasitic draws to sensor signal faults, our diagnostic process includes live data analysis, system voltage tests, continuity checks, and waveform verification. We locate the electrical root cause, not just the surface symptom.

Our technicians use OE-level scan tools, test lights, current probes, and high-resolution multimeters to track down issues across engine, body, chassis, and networked systems. We deliver accurate results before performing any repairs.

To get an estimate or schedule your electrical diagnostic service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Electric Power Steering: EPS systems use electronic motors and position sensors to deliver steering assist. Failures here can result in stiff steering, warning lights, or complete loss of assist. We test control modules, torque sensors, and motor current draw.

We verify signal quality from angle sensors and steering column torque inputs. If system recalibration or part replacement is required, we follow the correct initialization and coding steps to restore proper EPS behavior.

To get an estimate or schedule your EPS service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




HVAC Electrical Components: We test and replace electrical components in HVAC systems, including blower motors, resistors, climate control heads, and mode/blend door actuators.

Control issues may stem from failed modules or poor signal inputs from sensors. We trace these faults to restore full functionality of air distribution and temperature regulation.

To get an estimate or schedule your HVAC service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Engine Electrical and Ignition Systems: Engine ignition systems include spark plugs, ignition coils, control modules, and crank/camshaft position sensors. We troubleshoot misfires, hard starts, and no-start conditions related to these circuits using live scan data and oscilloscope captures.

In addition to ignition components, we test throttle control motors, engine wiring harnesses, and grounding paths. Issues such as poor idle, power loss, or erratic shifting often trace back to electrical faults in the engine bay, which we isolate and repair using precise testing protocols.

To get an estimate or schedule your engine electrical or ignition system service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Fuel Pump (Electrical Side): Electric fuel pumps rely on relays, wiring, and control modules for reliable operation. If your engine cranks but won't start, we test fuel pump voltage supply, relay activation, and fuel pump current draw under load.

We also check for control module grounding, fuel pump priming signals, and proper inertia switch/reset operation. Poor wiring or connector corrosion can cause intermittent fuel delivery, which we isolate and correct without guesswork.

To get an estimate or schedule your fuel pump service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Global Positioning System (GPS): Factory and aftermarket GPS systems require clean power, functional antennas, and reliable signal paths to maintain accuracy. We test GPS modules for correct voltage, satellite lock status, and CAN or multimedia network integrity.

Failure to update location, incorrect routing, or GPS loss warnings may stem from corrupted firmware or signal disruptions. We isolate these issues using scan tools and signal testers, and replace or reflash GPS modules as required.

To get an estimate or schedule your GPS service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Injectors (Electronic Control): Fuel injectors rely on precise electrical pulses from the ECU for proper timing and fuel atomization. We test injector resistance, power supply, and grounding paths to isolate misfire or performance issues.

Using lab scopes and scan tools, we verify injector pulse width and circuit balance during engine operation. Electrical issues, such as faulty wiring, poor grounds, or ECU driver faults, are diagnosed before recommending injector replacement.

To get an estimate or schedule your fuel injector service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Instrument Cluster: Instrument clusters rely on multiple data inputs from vehicle sensors, modules, and networks to display accurate information. If your cluster has dead gauges, flickering lights, or fails to power on, we evaluate voltage inputs, grounding paths, and data communication lines.

We also verify cluster self-tests, scan for internal faults, and check for firmware or display driver issues. Whether it’s a full cluster replacement or pinpointing a single failing circuit, we ensure your instrument panel functions reliably and accurately.

To get an estimate or schedule your instrument cluster service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.

As a related topic you may also want to read about our Infotainment System services.




Module Testing and Replacement: Modern vehicles contain dozens of control modules managing everything from lighting to stability control. We identify failed modules by confirming signal paths, communication faults, and programming errors.

Whether it’s a door control unit or a body gateway module, we verify CAN bus activity and isolate power distribution faults before replacing any component. Proper coding and adaptation procedures are followed to ensure seamless integration.

To get an estimate or schedule your module service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Power Windows, Door Locks, & Trunk Release: We diagnose and repair electric actuators, switches, and wiring faults that interfere with power windows, central locking, or trunk release systems. Symptoms can include stuck windows, non-functional locks, or failed key fob response.

Our testing includes voltage drop checks across motors and control inputs to determine the true source of the failure. We restore system functionality using tested components and clean, secure wiring repair methods.

To get an estimate or schedule your power windows, door locks, or trunk release service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Sensor Testing and Replacement: Sensor faults can trigger warning lights or affect drivability. We test signals from oxygen sensors, MAFs, throttle position sensors, coolant temp sensors, and more.

We use scan data and reference voltages to determine sensor behavior under live engine conditions. Replacements are made only when the data confirms sensor failure, avoiding unnecessary parts costs.

To get an estimate or schedule your sensor service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Starter Motor Repair and Replacement: No-start and click-no-crank conditions often point to starter circuit issues. We test key-on voltage delivery, starter solenoid function, and overall system amperage draw.

When needed, we replace worn starters and verify clean ground and battery connections. We also ensure relay logic and ignition switch function are intact to prevent repeated failures.

To get an estimate or schedule your starter motor service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Throttle Body (Electronic): Modern throttle bodies are electronically controlled and contain motorized plates governed by the ECU. We diagnose throttle lag, stalling, or limp mode by testing throttle position sensors and control motor circuits.

We perform live data comparison between pedal position and throttle response, checking for tracking errors, dropout, or slow actuation. Electrical faults in this system can cause major drivability problems, which we correct by verifying circuit integrity and performing throttle adaptations.

To get an estimate or schedule your throttle body service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Trailer Connector & Brake Controller: Installation and servicing of 4-pin and 7-pin trailer connectors, along with integrated or aftermarket brake controller modules. We verify proper wiring paths and secure grounding for safe towing.

If trailer lights or brakes aren’t functioning, we test voltages and current delivery at each connector pin and correct any circuit integrity issues before recommending repairs or installations.

To get an estimate or schedule your trailer connector or brake controller service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Tune-Up (Electrical Aspects): A modern tune-up includes more than just spark plug replacement, it involves verifying coil outputs, ignition timing, and sensor feedback loops. We test coil-on-plug systems, ignition module signals, and crank/cam sensor synchronization.

We also review throttle position behavior, mass airflow data, and fuel trim responses to ensure your engine runs clean and efficiently. Our diagnostics help maintain peak engine performance while preventing unnecessary part swaps.

To get an estimate or schedule your tune-up service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Wiper & Washer Systems: Wiper motors, washer pumps, control switches, and relays are tested when front or rear systems are inoperative or erratic. We isolate fuse, switch, or motor faults and verify clean ground paths.

We also repair wiring harnesses where moisture or abrasion has caused intermittent failures. Washer system function is verified with pump testing and nozzle flow assessments after electrical repairs are complete.

To get an estimate or schedule your wiper or washer system service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.




Wiring Repair: We identify and repair broken, shorted, or corroded wires using circuit tracing and load testing. Electrical tape alone doesn’t cut it, our repairs include proper splices, weatherproofing, and re-routing when needed.

Whether your issue is a parasitic draw or a sensor that intermittently fails, restoring clean electrical continuity is essential. Our methods ensure both immediate reliability and long-term durability.

To get an estimate or schedule your wiring service, please click here to continue. Even if you're not sure what you need, we’ll help sort it out.

Why Choose Us?

Diagnostic-Backed Repairs

We don’t guess, we test. Our equipment ensures the real issue is identified, so you avoid replacing components when the real fault lies elsewhere.

Service Area

We serve the following ZIP codes in Palm Beach County:

• Boca Raton, FL 33428
• Boca Raton, FL 33433
• Boca Raton, FL 33434
• Boca Raton, FL 33445
• Boca Raton, FL 33446
• Delray Beach, FL 33484
• Delray Beach, FL 33496
• Delray Beach, FL 33498

This is our standard service area.

For visits further north within Palm Beach County, a travel fee deposit will apply.

Request a Quote or Schedule a Visit